Quad door lock
Quad door lock
I am having trouble getting one of my quad doors to close well. I looked at the lock on the bottom of the door and noticed that the spring broke that is attached to the small wedge that helps keep the door tight. I called the dealer about it and they said I had to replace the lock and it would cost $70. I was wondering if there is another way to fix the lock.
Thanks,
Dave
Thanks,
Dave
If you take the inner panel off the quad door there is a vent low on the door that you can remove to get at the nuts holding the lock on. Don't just try to remove the bolts from the bottom, they will twist off. When I bought my truck one latch was rusted shut. Had to lay on the ground and run a punch through the little access hole to force it open. Don't know if you'll be able to fix yours or not. Mine was beyond repair. Can't find the link but I got a brand new one for about $60. Quick Ebay search shows $45 for a used 1.
Good luck
Good luck
I trashed all my little "christmas tree" plugs pulling the panel off. Only a couple bucks for a bag of new ones at most any parts store. Also snapped the little plastic retainer piece off the cable for the inside door handle. In my truck nobody rides in the back anyway so it wasn't an issue.
Trending Topics
If you take the inner panel off the quad door there is a vent low on the door that you can remove to get at the nuts holding the lock on. Don't just try to remove the bolts from the bottom, they will twist off. When I bought my truck one latch was rusted shut. Had to lay on the ground and run a punch through the little access hole to force it open. Don't know if you'll be able to fix yours or not. Mine was beyond repair. Can't find the link but I got a brand new one for about $60. Quick Ebay search shows $45 for a used 1.
Good luck
Good luck
Hook me up, I searched instead of creating a new post
I tried opening the functional passenger side door thru the access hole, but couldnt get it. Any more tips on what to beat on?
Thread
Thread Starter
Forum
Replies
Last Post
Dynocon
3rd Generation Ram - Non Drivetrain - All Years
4
Mar 4, 2008 08:32 PM
staarma
3rd Generation Ram - Non Drivetrain - All Years
0
Oct 25, 2007 12:49 PM
xp8103
Performance and Accessories 2nd gen only
4
Jun 2, 2006 07:00 AM
damon_achey
Performance and Accessories 2nd gen only
10
Jun 7, 2004 03:33 PM





