No Cruise??
Guest
Posts: n/a
No Cruise??
Cruise was working fine this morning. On my second trip to Hebbronville I went to turn it in and noticed the little "cruise" light didnt come on and the cruise is not working.<br><br>I looked for a fuse, but didnt find any.<br><br>Any ideas?
!
Guest
Posts: n/a
Re:No Cruise??
When I start the truck I can turn the cruise on. <br><br>I can set the cruise and it will work. I can cancel and resume, as long as I dont turn it off. ???<br><br>Sound like I need 4 hrs. of diagnostic from the dealer, 1 hour of labor to install a $40 sensor. :'(
Registered User
Joined: Aug 2002
Posts: 164
Likes: 4
From: East Texas
Re:No Cruise??
I have a 96 CTD 2500 and sometimes I have to press the cruise contol switch several times before it will stay on. I believe my problem is a switch problem. I removed the switch to clean the contacts but it is a sealed unit. I guess replacement is the alternative. So long as I can get the cruise working, I'll just keep pressing on that switch until it works no longer.
Administrator
Joined: May 2002
Posts: 6,522
Likes: 4
From: Sandy, Utah
Re:No Cruise??
Anything in the steering wheel, IE: cruise, horn, airbag, is run through the "clockspring".<br><br>This was a recall, or at least a TSB was issued about it.<br>As the airbag is connected to it, it became a safety issue, otherwise I don't think DC would have addressed it.<br><br>Might want to look into that.<br><br><br>phox<br>
Thread
Thread Starter
Forum
Replies
Last Post
trophystock
12 Valve Engine and Drivetrain
3
Jul 6, 2006 06:28 PM
sam
24 Valve Engine and Drivetrain
3
Mar 31, 2003 09:04 PM
03quadduallyho
3rd Gen Engine and Drivetrain -> 2003-2007
2
Mar 24, 2003 05:34 PM
