Any body try any fourth gen brake parts onto a 2nd gen truck to see if they fit? The fourth gen front brakes (14.1 in rotor vs. 13.8 in rotors) are even bigger than the 3rd gen brakes. I might check into this as I'm currently rebuilding my brakes on my 02.

Good thread guys.

 

my 1995 had the worst brakes ever, then I broke my pinion and found a rear disk Dana 70 for $200, grabbed it and and after a few bumps in the road like Ebrake cables and re-flareing the lines to a larger size i now have amazong brakes! Wish I could do the 3rd gen rotors but mine are the sucky ones that require me to pull the entire hub apart

 

Hmm, that would be cool to know! Good luck and def let us know what you find!

 

ok I m really reaching to see if any one has tried to see if the forth gen rotors etc swap fits. lol im hoping someone in the past 2 years has tried by now and has an answer. I need to do this swap before I put twins in this truck. lol because I know when I do im gonna need the stopping power running 39.5 in tires after I wear out the 37's.

 

Bringing this one back from the dead...did anyone ever try 4th Gen brakes on a 2nd Gen?