Idiot lights on, guages not working
That can be caused by a module starting to fail, or a connection that just has enough resistance to mess around with the bus voltages. I would suspect that if the modules saw a really low voltage momentatily, even during cranking, that it could cause this. I would start by unplugging the cluster and spraying the terminals with electronic cleaner, then blowing them dry with compressed air and reseating them. Then do a 10 minute battery disconnect and see if it makes a difference.
Thread
Thread Starter
Forum
Replies
Last Post
Sleigher
12 Valve Engine and Drivetrain
11
May 4, 2017 02:12 PM
quadstar
3rd Gen Engine and Drivetrain -> 2003-2007
2
Nov 20, 2009 05:23 PM



