2nd Gen. Dodge Ram - No Drivetrain Discussion for all Dodge Rams from 1994 through 2002. Please, no engine or drivetrain discussion.

How do you get the power window

Old Jul 25, 2005 | 10:03 PM
  #1  
Dojman's Avatar
Thread Starter
Registered User
 
Joined: Apr 2003
Posts: 289
Likes: 0
From: Southeast,MO
How do you get the power window

switch panel loose from the door without tearing something up? '01 model My drivers side switch for passengers window will not send the window down? Up is fine. Did I not see, some time ago, an easy fix for this?
Reply
Old Jul 25, 2005 | 11:00 PM
  #2  
Dojman's Avatar
Thread Starter
Registered User
 
Joined: Apr 2003
Posts: 289
Likes: 0
From: Southeast,MO
I found an old post about it. Say the panel just "pops" out?
Reply
Old Jul 26, 2005 | 09:29 AM
  #3  
mamm7215's Avatar
Registered User
 
Joined: May 2004
Posts: 177
Likes: 0
From: South Surrey, B.C. Canada
Basically you just get a screwdriver and GENTLY lift up under the edge and then grab it and work it up. It's only held in by 2 retainer clips on each end. You may need to replace 1 after as they tend to break but they're cheap, dealers have 'em.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
C Schomer
3rd Generation Ram - Non Drivetrain - All Years
1
Sep 21, 2014 03:19 PM
Rednecktastic
3rd Generation Ram - Non Drivetrain - All Years
2
Aug 29, 2010 11:26 PM
raven392003
3rd Generation Ram - Non Drivetrain - All Years
7
Oct 29, 2007 11:39 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:54 PM.