Fuel: 500 Sulphur
02-18-2008, 07:56 PM
#1
Registered User
Thread Starter
Fuel: 500 Sulphur
I'm still able to get LSD.....
...uh that didn't sound right..., Low Sulphur Diesel with 500 ppm. I know folks have varying opinions on additives (lube/2cycle/cetane), but in general, should I consider adding stuff to 500ppm fuel?
...uh that didn't sound right..., Low Sulphur Diesel with 500 ppm. I know folks have varying opinions on additives (lube/2cycle/cetane), but in general, should I consider adding stuff to 500ppm fuel?
02-18-2008, 09:06 PM
#2
Registered User
Join Date: Dec 2007
Location: North Carolina or Kentucky. Take your pick
Posts: 2,738
Received 0 Likes
on
0 Posts
If it lived up till ULSD was formulated. Does it make sense that it will suddendly die using what been using for six years. The new stuff has lube additive added. If it gives you that warm fuzzy feeling adding stuff, then by all means do.
02-18-2008, 11:45 PM
#3
Registered User
Join Date: Jul 2007
Location: Leander,Tx
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
Where at in S.A.? Will be there next weekend.
02-19-2008, 06:30 AM
#4
Registered User
Join Date: Nov 2006
Location: Rochester, NY
Posts: 2,333
Likes: 0
Received 0 Likes
on
0 Posts
Probably wise to add some algaecide if it's as old as I'm guessing it is, in which case most of them have lubricants too. You should be good to go after that.
Thread
Thread Starter
Forum
Replies
Last Post
Rocket95
12 Valve Engine and Drivetrain
4
09-17-2006 05:44 PM
Hummin Cummins
3rd Gen Engine and Drivetrain -> 2003-2007
6
02-11-2003 12:14 PM