Does anyone know if ford f350 rims will fit on my dodge ram 2500 , both are 4x4 8 lug? thanks.

 

Someone else will chime in but chevy and dodge interchange but not ford.

 

And you want to do this why?

 

short answer, no... the center hole is smaller!

 

Center holes ban be enlarged... But the bolt pattern is different. Ford 99+ are 8 on 170mm, all other 8 lug are 8 on 6.5"

 

no, they don't fit, different bolt pattern.

 

Thanks Guys, Its Just That This Guy Had These Aftermarket Nice Rims & Tires For Sale, Cheap. Thanks

 

Cheap = Good


Different bolt pattern = Bad

 

there is one style of stock ford rims i would run on my dodge if they fit, there were a polished or chrome plain and basic 10-hole pattern wheel...but the bolt pattern doesn't match. oh well.

at least ford made some decent wheels LOL

 

Ford didn't make those wheels alcoa did, thats why they are good quality. I was also under the impression that ford and dodge would interchange as long as they weren't metric Could have sworn had ford daully wheels on a dodge 3500 at work.

Jed

 

i dunno alcoa made them, these were SRW wheels, not dually wheels.

anyway, all the fords from 99+ use metric 8x170mm pattern, and dodges use standard 8x6.5, so they can't interchange

 

I was talking about 2 differenet types of wheels in my post should have been more clear. I have seen 2500 dodges with alcoa/ford srw rims from a pre-superduty ford, maybe they had center ford enlarged I don't know.
As for as on drw I could have sworn I had ford wheels on a 3500 dodge at work Might be wrong.
I gues what I trying to say is I don't have a clue just here killing time

Jed

 

I run ford wheels on my '99. As was said, the ford rims from the non metric bolt pattern will fit the dodge with the non metric wheels. That is 8x6.5