Door Panel Removal
#1
Registered User
Thread Starter
Door Panel Removal
I need to replace my door speakers (passenger side if that makes any differnece). Would appreciate any suggestions before I pop-off something I'm going to regret?
#2
Registered User
Join Date: Feb 2008
Location: Beaumont, TX
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
If you don't you may break the doghouse's for the clips. Either way you will probably mangle the clips, do yourself a favor and buy some replacements here:
http://www.parts-express.com/pe/show...number=265-911
Just buy a bunch so if/when you do the door you have them available. I think the door has around 15 so at least that many. Clips are around the periphery of the door.
Other than that just be patient and careful. The wire harness for the door controls pops out of the panel, then just fish it back through the panel to free the panel completely (you'll see what I mean).
#4
Registered User
Thread Starter
#5
Registered User
Join Date: Feb 2008
Location: Beaumont, TX
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
Usually yes, but you'll pay $3 for 2 clips and when I went through this, each autozone I went to had maybe 1 or 2 packages of the clips, so to do an entire door you'd need to go to 6 parts store and spend $20.
Hence I just decided to order the ones online and get them delivered to my door.
Just my experience. Your luck may be better
Hence I just decided to order the ones online and get them delivered to my door.
Just my experience. Your luck may be better
Thread
Thread Starter
Forum
Replies
Last Post
D45
3rd Generation Ram - Non Drivetrain - All Years
7
11-11-2014 09:56 AM
PRO-NRA
3rd Generation Ram - Non Drivetrain - All Years
4
02-10-2008 10:04 AM
LockedandLoaded
2nd Gen. Dodge Ram - No Drivetrain
9
02-08-2008 06:14 AM
mp_tx
3rd Generation Ram - Non Drivetrain - All Years
7
12-15-2006 12:03 PM
SkyHarborCowboy
3rd Generation Ram - Non Drivetrain - All Years
4
02-13-2006 07:46 PM