Brake flush and GM brake cylinder
08-01-2009, 05:00 PM
#1
Registered User
Thread Starter
Join Date: Aug 2006
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Brake flush and GM brake cylinder
Replaced the rear wheel cylinders with the GM wheel cylinders, and they make a clear difference in stopping. Only had to remove one of the return springs to get the old ones out.
Also, used the "Motive" power brake flusher system, and flushed all the old brake fluid out and pumped new Dot 4 fluid in, by myself. No pumping of the brake pedal, just opened up the fitting and let it fill in their catch bottle.
Amazing the dark color of the old fluid, and the particles in it.
99 4WD, 120K miles
Also, used the "Motive" power brake flusher system, and flushed all the old brake fluid out and pumped new Dot 4 fluid in, by myself. No pumping of the brake pedal, just opened up the fitting and let it fill in their catch bottle.
Amazing the dark color of the old fluid, and the particles in it.
99 4WD, 120K miles
Thread
Thread Starter
Forum
Replies
Last Post
CACalomino
3rd Gen Engine and Drivetrain -> 2003-2007
16
03-22-2010 06:35 PM
Sam Turner2
3rd Gen High Performance and Accessories (5.9L Only)
8
11-18-2008 10:17 AM
Journier
General Diesel Discussion
11
11-22-2004 02:56 PM