Mark this thread as Unsold
Truck For Sale '97 12 Valve
05-30-2017, 06:49 PM
#1
Registered User
Thread Starter
Join Date: May 2017
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
'97 12 Valve
1997 Dodge Ram 2500 SLT 4WD 5-speed 4X4, Excellent Condition, Garaged since 2001. Body is clean and straight with no rust. 195,000 miles total on Truck, AC, PDL, PW, 3.54:1 rear gears with Positrac, 4" inline Pac-Brake exhaust brake with air compressor, Custom aluminum front bumper, 5th wheel hitch, std frame mount receiver hitch, 2 wheel low kit, Brite Box, MagHytec rear diff cover and telescoping tow mirrors, 78 gallon diamond plate auxilary fuel tank.
10,000 miles on Storm Block Reman with Hamilton 188/220 Cam and retainer, 60 PSI valve springs, 62/68-14 Bell Turbo, Custom Bench Tuned P-pump, DFI 5-13 injectors, 286050 marine pistons, Timing set to 16.25 deg, O-ringed head, ARP Head studs and flywheel bolts, 3 peace exhaust manifold, AFC-Live in cab tuning, New BD Intercooler, fresh vacuum pump, alternator, power steering pump, water pump and fan clutch. Fluid Damper harmonic dampner. Fleece coolant bypass kit, New (not rebuilt) NV4500 5 speed and Southbend 13" OFE clutch, New Bogeson steering box and steering shaft, All new belt and hoses.
This truck purpose built for killing Ford and Chevy trucks while pulling my 5th Wheel
Have dyno'ed over 550HP and 1200 ft/lbs
Selling to help fund a new truck, going to the dark side (electronics).
More pictures available upon request.
Asking $17,500 OBO
10,000 miles on Storm Block Reman with Hamilton 188/220 Cam and retainer, 60 PSI valve springs, 62/68-14 Bell Turbo, Custom Bench Tuned P-pump, DFI 5-13 injectors, 286050 marine pistons, Timing set to 16.25 deg, O-ringed head, ARP Head studs and flywheel bolts, 3 peace exhaust manifold, AFC-Live in cab tuning, New BD Intercooler, fresh vacuum pump, alternator, power steering pump, water pump and fan clutch. Fluid Damper harmonic dampner. Fleece coolant bypass kit, New (not rebuilt) NV4500 5 speed and Southbend 13" OFE clutch, New Bogeson steering box and steering shaft, All new belt and hoses.
This truck purpose built for killing Ford and Chevy trucks while pulling my 5th Wheel
Have dyno'ed over 550HP and 1200 ft/lbs
Selling to help fund a new truck, going to the dark side (electronics).
More pictures available upon request.
Asking $17,500 OBO
Last edited by trakfin; 05-31-2017 at 05:24 AM. Reason: Accuracy
Thread
Thread Starter
Forum
Replies
Last Post
1320
12 Valve Engine and Drivetrain
6
05-17-2003 03:28 PM
phildog
3rd Gen Engine and Drivetrain -> 2003-2007
2
04-02-2003 05:44 AM