VP44,No cold start
#1
VP44,No cold start
Was wondering if anybody else has experienced this. Truck will not start as soon as tempature drops below around +5, ive actually run the truck for over a year like this. What I gotta do is run a heat gun on top of the VP for bout 5 to 10min's depending on how cold it is and it fires right up, wont even stumble or pop till I do this, heater grid and Batt's as wells as lift pump have all been replaced. Makes for a long winter when ya cant shut your truck off for an hour without a pluggin close by to run a blow dryer or heatgun. Time for a new VP methinks!
Thread
Thread Starter
Forum
Replies
Last Post