VP Error Codes
Registered User
Joined: Nov 2006
Posts: 2,333
Likes: 0
From: Rochester, NY
Registered User
Joined: Dec 2006
Posts: 839
Likes: 0
From: Greenville, IN
Here is another source of them
http://www.idahobombersforum.com/tip...rror_codes.htm
http://www.idahobombersforum.com/tip...rror_codes.htm
Registered User
Joined: Nov 2006
Posts: 2,333
Likes: 0
From: Rochester, NY
Hope this helps:
If you check for fault codes with a scan tool that is only capable of pulling codes from the PCM side, the only code you typically get is a P1693. This code is a companion code, meaning that the PCM has been informed that there is a problem in the engine ECM, but the ECM has not relayed the exact code and you will have to communicate directly with the ECM to find out what the exact code is. This will take a scan tool or Cummins Insite that is capable of communicating with the engine ECM.
Thread Starter
Registered User
Joined: Dec 2007
Posts: 27
Likes: 0
From: TX
that seems like it should work..... see what the deal is people bring me the vp's and tell me it read such and such code and i have no clue what that code is... when i read out the pump psg i get different codes and i know exactly what the pump codes mean just not the engine codes they tell me
Thread
Thread Starter
Forum
Replies
Last Post
exwrestler
3rd Gen Engine and Drivetrain -> 2003-2007
5
Feb 5, 2010 09:34 AM
sallyman1
3rd Gen High Performance and Accessories (5.9L Only)
4
Aug 26, 2008 06:20 PM