VP died on the way home, need installer in Fort Worth
#1
Registered User
Thread Starter
Join Date: Dec 2005
Location: DFW, Texas
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
VP died on the way home, need installer in Fort Worth
The truck was paid off last month, and how does it repay me?
I get on the highway, pull into the hammer lane and then the truck loses all power and starts idling rough. I manage to get it pulled over to the shoulder and it will not start. CEL comes on immediately. I cant confirm codes because you cant keydance a 99 but thats what it has to be.
So, who knows a good shop in the Fort Worth, Texas area who wont bend me over on the price? I dont need a super duper race pump. Honestly I just need something that will last me a few more years. Between this and the transmission having been replaced only a year ago im at my wits end with this thing. I need it to survive long enough to get the wifes car paid off (5 years) and into something new that does not need $300/mo to keep the thing running 10 days out of the month (I ride most of the time)
I get on the highway, pull into the hammer lane and then the truck loses all power and starts idling rough. I manage to get it pulled over to the shoulder and it will not start. CEL comes on immediately. I cant confirm codes because you cant keydance a 99 but thats what it has to be.
So, who knows a good shop in the Fort Worth, Texas area who wont bend me over on the price? I dont need a super duper race pump. Honestly I just need something that will last me a few more years. Between this and the transmission having been replaced only a year ago im at my wits end with this thing. I need it to survive long enough to get the wifes car paid off (5 years) and into something new that does not need $300/mo to keep the thing running 10 days out of the month (I ride most of the time)
#2
Registered User
Man...I was just there last weekend could have probably helped you . Figrue $1k for a VP pump. Try calling M&D in Dallas 800-395-4003, they s/b able to help you.
#4
Registered User
Join Date: Mar 2007
Location: Fort Worth, Texas
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
http://www.raystransmission.com/
It's Ray's Transmission & Diesel Performance.
Ask for Curt. The jacked up Ford with the stacks is his.
He told me he was going to put a Cummins in it.
They're on West Pafford St and also on I-35 South going towards Burleson
It's Ray's Transmission & Diesel Performance.
Ask for Curt. The jacked up Ford with the stacks is his.
He told me he was going to put a Cummins in it.
They're on West Pafford St and also on I-35 South going towards Burleson
#5
Registered User
Thread Starter
Join Date: Dec 2005
Location: DFW, Texas
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
Well if I can get a good deal on a pump and get it installed for not that much more at a shop ill just let them do it. Ive looked at the instructions and it does not seem that hard...ive undertaken much worse.
Just not sure what pump to go with
Just not sure what pump to go with
Thread
Thread Starter
Forum
Replies
Last Post
jaws136
24 Valve Engine and Drivetrain
7
09-11-2008 10:46 AM
Betsy II
3rd Gen Engine and Drivetrain -> 2003-2007
15
10-14-2007 10:50 AM
Crawler
Natl. and Regional Chapters / Special Events
44
10-24-2003 07:46 PM