Truck wont start after attempted APPS reset
Thread Starter
Registered User
Joined: Sep 2025
Posts: 3
Likes: 0
Truck wont start after attempted APPS reset
As the title states gents,
I was having some surging in 5th and 6th gear on two separate occasions, so i did a little reading on here and other forums and all said that it would be worth resetting/ recalibrating the APPS on the truck. I did that and now it wont start at all. I never unplugged anything from the harness, the only thing i unplugged was the batteries for the reset.
I have tried the reset several times and no luck. I did cycle the key 3 times to check for any codes and the only thing that reads out is P ecu and then P done. So I have no codes showing.
Im lost and need help fellas!
2002 Dodge Ram 3500 24v 6 speed
Thanks,
Barnabie
I was having some surging in 5th and 6th gear on two separate occasions, so i did a little reading on here and other forums and all said that it would be worth resetting/ recalibrating the APPS on the truck. I did that and now it wont start at all. I never unplugged anything from the harness, the only thing i unplugged was the batteries for the reset.
I have tried the reset several times and no luck. I did cycle the key 3 times to check for any codes and the only thing that reads out is P ecu and then P done. So I have no codes showing.
Im lost and need help fellas!
2002 Dodge Ram 3500 24v 6 speed
Thanks,
Barnabie
Registered User
Joined: May 2006
Posts: 5,613
Likes: 166
From: Pacific NW, B'ham, Kalispell MT
See my reply in the original old thread you posted on.
There's a good video on Timbo's page here.
Timbo APPS
There's a good video on Timbo's page here.
Timbo APPS
Thread
Thread Starter
Forum
Replies
Last Post
lcdo7495
3rd Gen Engine and Drivetrain -> 2003-2007
7
Mar 15, 2010 06:20 PM
cody459
3rd Gen Engine and Drivetrain -> 2003-2007
1
Feb 18, 2009 05:03 PM
