24 Valve Engine and Drivetrain Discuss the 24 Valve engine and drivetrain here. No non-drivetrain discussions please. NO HIGH PERFORMANCE DISCUSSION!

tires

Old Aug 29, 2011 | 07:01 PM
  #1  
southerman's Avatar
Thread Starter
Registered User
 
Joined: Oct 2007
Posts: 207
Likes: 0
From: texas/oklahoma
tires

what would cause my front tires to wear on the sides passenger side worse than drivers and noticed rear tires wearing in the middle?
Reply
Old Aug 29, 2011 | 07:20 PM
  #2  
maxwellp's Avatar
Registered User
 
Joined: Aug 2011
Posts: 195
Likes: 2
From: Madison, WI
Talking

Inside? outside? Front

Center Rear / too much air psi
Reply
Old Aug 29, 2011 | 07:33 PM
  #3  
southerman's Avatar
Thread Starter
Registered User
 
Joined: Oct 2007
Posts: 207
Likes: 0
From: texas/oklahoma
outside on the front passenger side worse rear in the middle passenger side also worse.
Reply
Old Aug 29, 2011 | 07:52 PM
  #4  
maxwellp's Avatar
Registered User
 
Joined: Aug 2011
Posts: 195
Likes: 2
From: Madison, WI
As far as the rear, the passenger side tire is the drive tire. It will be the baldest. Center wear is from too high psi.
If only the front passenger is wearing on the out side it has to much positive camber.
Reply
Old Aug 29, 2011 | 07:54 PM
  #5  
southerman's Avatar
Thread Starter
Registered User
 
Joined: Oct 2007
Posts: 207
Likes: 0
From: texas/oklahoma
yea psi is good just a couple lbs. low i guess i will get a front end alignment. thanks
Reply
Old Aug 30, 2011 | 06:37 PM
  #6  
nitrousn's Avatar
Registered User
 
Joined: May 2004
Posts: 1,137
Likes: 1
From: upper michigan
You might have tires starting to seperate.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
chrisminx
3rd Gen High Performance and Accessories (6.7L Only)
14
Jul 7, 2010 06:48 PM
1320
General Diesel Discussion
8
May 29, 2009 10:24 PM
sakisaki400
3rd Generation Ram - Non Drivetrain - All Years
23
Dec 31, 2006 10:17 PM
Captain
Other
6
Sep 9, 2005 12:16 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:23 PM.