Port for Electric Fuel Gauge
03-27-2018, 06:21 AM
#1
Port for Electric Fuel Gauge
I need to install an Electric Fuel Pressure Gauge on my 2001 Ram.
There are 2 large inlet ports on the outside of my VP44. One of those has the Fass Pump plumbed into it.
On the front side of those two ports, there is a smaller plugged port which looks to be about a 1/4".
Is this the port I install the snubber and gauge sender?
Thanks.. Gary
There are 2 large inlet ports on the outside of my VP44. One of those has the Fass Pump plumbed into it.
On the front side of those two ports, there is a smaller plugged port which looks to be about a 1/4".
Is this the port I install the snubber and gauge sender?
Thanks.. Gary
Last edited by glmoore0001; 03-27-2018 at 06:23 AM. Reason: Grammar
Thread
Thread Starter
Forum
Replies
Last Post
Diesel Girl
3rd Gen Engine and Drivetrain -> 2003-2007
18
10-06-2013 03:03 PM
cj5er
2nd Gen. Dodge Ram - No Drivetrain
6
12-20-2009 09:19 PM
nrussell
3rd Gen High Performance and Accessories (5.9L Only)
4
07-23-2008 08:58 PM
QWKRTNU
3rd Gen High Performance and Accessories (5.9L Only)
1
09-26-2006 10:22 PM