smokinram99

I've installed the edge EZ module and now I'm installing the boost elbow supplied... I cannot thighten it the right direction to the oe hose... I'm trying many many times but it always goes the opposite side... anyone have tricks?
It must be tight or a bit loosen?

thanks guys
ROB

bob4x4

Throw some teflon tape on the threads and you should be fine with where it needs to be.If it is a lil on the loose side a tiny leak there will be inconsequential.

Bob

smokinram99

thanks BOB, I used teflon tape and It seems works good! I hope it doesn't burnt under heat...