Headgasket replaced...hard starts now
05-27-2007, 11:33 PM
#1
Registered User
Thread Starter
Join Date: Mar 2007
Location: Michigan/Indiana
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Headgasket replaced...hard starts now
Me and my buddy replaced my HG this weekend, wasn't too bad of a job and it felt good to get the truck back running on the road.
I didn't originally have any start up issues directly after replacing the HG until today when i parked my truck for about 20 mins and got back in and it took more than a few cranks to start. It only seems to do it after the truck sits for a little bit. I have no idea what could be the problem, im hoping the VP-44 doesn't need to be replaced, it was replaced a year ago before i owned the truck.
Other than these start up issues the truck is running great & i can't wait to go pulling this summer with it
I didn't originally have any start up issues directly after replacing the HG until today when i parked my truck for about 20 mins and got back in and it took more than a few cranks to start. It only seems to do it after the truck sits for a little bit. I have no idea what could be the problem, im hoping the VP-44 doesn't need to be replaced, it was replaced a year ago before i owned the truck.
Other than these start up issues the truck is running great & i can't wait to go pulling this summer with it
Thread
Thread Starter
Forum
Replies
Last Post
209trucker
1st Gen. Ram - All Topics
14
04-13-2014 02:29 PM
saccowboy
3rd Gen Engine and Drivetrain -> 2003-2007
6
09-16-2009 10:23 PM
sCreamin400
3rd Gen Engine and Drivetrain -> 2003-2007
5
08-10-2006 01:10 PM