Cold weather start
11-05-2011, 01:00 AM
#16
Registered User
hutch98
THe block heater is threaded into the block just above the oiol filter bracket and a little behind it IIRC.
It will look like an electrical connector with a threaded end, male, about 1" in diameter and have three or four posts in it. That's the block heater. You may just need a cord, available from any auto parts, preferrably NAPA.
THe block heater is threaded into the block just above the oiol filter bracket and a little behind it IIRC.
It will look like an electrical connector with a threaded end, male, about 1" in diameter and have three or four posts in it. That's the block heater. You may just need a cord, available from any auto parts, preferrably NAPA.
Thread
Thread Starter
Forum
Replies
Last Post
joel
3rd Gen High Performance and Accessories (5.9L Only)
3
01-22-2005 08:59 PM
sawboywv1
3rd Gen Engine and Drivetrain -> 2003-2007
24
01-26-2004 10:24 AM