have a 3500 five speed With an adge dragcomp clutch stop
Working. Would not go into gear at stop light started working just seconds later what could be wrong is it a bad clutch if so what would be the best clutch for the price? I've herd of westbend and valair. What should I use with that chip? Please help

 

Sounds like your hydrolics are going out or they are a little low on fluid. If it is your clutch I have a valair and it does ok. Will probably try Southbend next time

 

Southbend on the clutch, don't go with a cheap one you will regret it.

 

Southbend clutch and hydraulics.

Kurt

 

I would go with a haisley street puller over southbend! And exspecially if you plan on doing any pullin at all!