I've looked at advance for some door panel clips but couldn't find a match. Anyone on the board have some extra ones?

I've had my panels off for a couple of years now, and it's time to put them back on.

Or if anyone has a source that supplies them, a link would be very helpful.

Thanks,
Matt

image below is of the one and only clip I have ; )

 

Did you try the "help" section of any other parts places? Those are funky. If it were me, I would go to a junk yard and come out with a pocket full of them (and that cigarette lighter you've been missing too). No seriously though, there has to someone who has them.

BTW, you could be a hand model.

 

Dorman/AutoGrade 45879 looks about right.

 

Looks like they are not stocked many places, this is one source a Froogle ad turned up.

ttp://www.rockauto.com/

Punch the p/n into their search engine and they come up.

 

For a 25 pack use p/n 700-471.

Ain't the internet wonderful?

 

I love the internet!! Thanks man, I wasn't having any luck finding them and then you found them for less than two cents apeice. Your freakin awesome!

 

I think that's 48 cents each, you gotta order in increments of 25. I'm not that awesome.

If you have any leftovers, send them to me. I'm missing a couple myself.

 

Napa part # is 665-1103

 

Check out your local body shop. I had a sympathetic repair man hand me a few.

 

Dang, your right. After going to the checkout my total came to 20 bux with shipping. YIKES! I'll check with nappa and see what they want to charge, thanks spunbearing for the part number.

boatnik, I thought about going that route, but I need, like the whole lot of 24-26 clips ; )

 

Napa online says $4.99 for 100.

However, you don't get the little foam insulator on these. Maybe there's another part number for that style?

 

I think I'll have time Monday to stop by Napa and see what they have. Maybe, I dont really need the insulator?? Guess I'll give it the old test,eh!

 

Get a chunk of pipe insulation from Home Depot/Lowes and cut it up into little blocks for foam part.

 

I hate those little clips. I've had one of my panels off a few times and each time I end up with one less then i started. If I thought I could make it look good I'd put some sheet metal screws in there. That would hold. Oh well everything has to have a flaw somewhere.
Sam

 

Tried that number on NapaOnline and nothing came up. Are you sure that's it? I need some of these little boogers too!