will the rims from a 2003 dodge cummins 2500 go on a first gen 250? and what about the other way around. Thanks

 

they both have the same lug pattern

 

what about backspacing and all? Will i have any problems with rubbing or not fitting?

 

no since your is a 4wd you should be good to go, i have a 2wd so i had to get a 1.5" wheel adapter to clear the front suspension components and bigger bulge lugnuts

 

Thank you.

 

some people replace all the studs b/c the newer dodges have 9/16 studs and lugnuts but you can just get larger 1/2 lugnuts for our 1gen studs like

http://cgi.ebay.com/ebaymotors/32-LU...Q5fAccessories

 

ok, should i have a problem putting the wheels on the first gen since the studs are not as big as the third gen or should the rims be good?

 

no the lug nut will make up the size difference i dont know for sure about placing 1gen wheels on a 3rd gen though/

 

The wheels on the first gen are american racing wheels so i don't know about the bolt holes.

 

im sure they will work most wheels have a tapered lug nut hole so you can use them on various vehicles with different stud sizes. If you did want to switch out all your studs their is info on how to do it in the 1 gen sticky FAQ section

 

Thanks

 

You will need spacers! I put 1.5" spacers on. The ones I bought had 9/16 lugs in them instead of 1/2". That way i could use the stock 3rd gen nuts, and use the hub caps. i cut holes in the caps for the lockouts and they look real sharp. Check my profile out for pics!

 

ok, for whatever reason my profile doesn't have my pics....

Here...

 

very nice, clean truck!! i like the location of the lights on the bumper.

 

I'm diggin those rims. Where might Ia guy find those? Schamran, I PM'd you today about your rims. I see now you used 1.5" spacers. I just need to get put on a location for the rims.

David