I'm just wondering why did you post that? not trying to give any one a hard time jus wondering

 

BC847's truck

 

85' 4 door longbed dually with p pumped 12 valve 4 wheel drive lifted sittin on 22.5 Alcoa's dark grey with a clearcoat that you could comb your hair in (assuming you have hair cause mine fell out) Air ride on all 4 corners.

 

my 92 with all my current mods in sig (still have a 400hp valair clutch, '99 i/c with 3" piping, and a 366 spring to install), a 4" lift, 35X10.50 R16 BFG all terrains. my HX35 with a wastegated 12cm housing sitting over a HT3B. 6x16's, fire rings, head studs, 4" dp to 5" after tcase into the bed with 6" turn outs, my current headache rack and tool box, a "deer slayer" bumper with four 4" fog lights that are sleeved into the bumper, NV4500 with my NP205, D80 with a LSD or locker, 2nd gen seats from a 24v with the seat belts in the seats, trans and diff temp gauges. goose neck ball hitch, traction bars, and soon as summer hits she's gettin paint. 1990 Dodge ram Pacific Blue.

 

Thats so funny.

 

His Volvo wagon got run over by a Dodge.

 

Black top/Silver center/Black bottom Crew cab, 4wd, dually, Common Rail, NV5600, SBC DD, Studded, Cammed, Haisley intercooler, dual cp3's, Smarty/MP8, 100hp injectors, SPS 66, 7" cab high black single mitre, D80/lsd/3.54's, 3rd gen seats front and rear, '91-'93 grille, tinted, lift and spacers to clear 315's on black 3rd gen steelies and chrome lugs, basically a 3rd gen with a 1st gen mask.

Who wants to kill me?

 

mine would be a 93 ext cab w350 drw blue top siver middle blue bottom, 12v, nv4500 sittin on some 19.5s and a small lift.

 

I think my truck but 4x4.
TOMMY

 

I think that would be awesome 93fury. Anyone know what that standalone unit for a CR costs? I have a feeling I definitely can't afford this...

 

Mmmmmmm, yep. That's pretty much exactly what I'm building except it's gonna be a Chevy body . . . . if there were any dodges like that in this part of the world that's what it would have been. And I already have two straight axle Chev 4-door longbed dually 4x4's . . . . .

 

im bulding mine right now, 1993 W250 with frame boxed, 12" lift, dual shocks all 4 corners, dual 6 or 7" aussie stacks, 22.5 alcoas with duals on the back, my bush box with the tire carrier like baja trucks have, custom rear bumper and front bush bumper, roof rack with 4 6" off road lights, aluminum head ache rack, Georend transmission or ATS transmission, twin turbos, o-ringed head p-pump, powerstrock intercooler, full rollcage in cab, truck will be alll satin black rims and all, with crome

 

one that is quiet in the cab, runs, and doesnt leak oil, from any where, and one with good door hinges. pretty much my dreams are shattered. so ill stick with my 2 pickups.

 

My dream 1st gen truck is a 350, ex cab, 4x4, 5spd, with a super clean body.. I want one of them so bad I hardly cant stand it,lol.. course then if I had that I would have to mod it the way I wanted it.. I also got plans for my current 1st gen if I ever get the money

 

I pretty much own mine. Needs more stuff tho.

I just really wanna bobbed duece and a half on 52's and some 46's for the war wagon.