Thinking of going with a cooling mist stage 3 egt set up but don't know which nozzles to start with and the best place to place them. I also have the CoolerTubz set up. It will be for tow & play.

Thanks

Mike

 

Big and close to the intake. I have two Snow 625's in mine.

 

What exactly did you have welded on the plumbing to thread the nozzles into and are the bottom of the nozzles flush with the inside of the tube?

Thanks Dave
Mike

 

I bought a stainless steel pipe coupler from McMaster-Carr, sawed it in half, and fishmouthed it to fit the pipe for good weld fitment. One of my customers tig'ed them on for me. The nozzles stick out into the tube about 1/2".

 

I used a home-made grid delete spacer with two Coolingmist .380s. The nozzles spray from opposite sides and are just about flush with the inside spacer wall.

http://stuff.is-a-geek.net/PhotoAlbu...cs/CTD_179.jpg