1st Gen. Ram - All Topics Discussion for all Dodge Rams prior to 1994. This includes engine, drivetrain and non-drivetrain discussions. Anything prior to 1994 should go in here.

VE TIMING

Thread Tools
 
Search this Thread
 
Old Nov 25, 2002 | 08:29 PM
  #1  
1ST GEN.'s Avatar
Thread Starter
Registered User
 
Joined: Sep 2002
Posts: 278
Likes: 0
From: Benton, Arkansas
VE TIMING

I HAVE BEEN GOING TO ADVANCE MY TIMING ON MY 92' I HAVE P.O.D.'S AND I WAS WONDERING HOW FAR I SHOULD TURN THE PUMP AN EIGTH OR QUARTER INCH.
Reply
Old Nov 26, 2002 | 05:41 PM
  #2  
Monty's Avatar
Administrator
 
Joined: Sep 2001
Posts: 1,440
Likes: 2
From: Mustang, OK
Re:VE TIMING

15* advance is a pretty good point for the POD's. 1/8" should give you 1.40-1.45 plunger travel. That is, if the pump isnt off time from the stock 1.25mm. I would start out at 1/8", if this doesnt suit you, bump it up another 1/8". But, I wouldnt go very far over 1/4". I believe the highest advance that a VE can take is 1.7-1.75mm.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GR40RCapri
12 Valve Engine and Drivetrain
5
Jul 24, 2006 11:47 PM
GR40RCapri
Performance and Accessories 2nd gen only
5
Jun 25, 2006 12:53 AM
West Coast
12 Valve Engine and Drivetrain
3
Mar 26, 2006 11:09 AM
RonP
3rd Gen High Performance and Accessories (5.9L Only)
12
Feb 24, 2006 02:12 PM
redhornet
12 Valve Engine and Drivetrain
4
May 28, 2004 06:06 PM




All times are GMT -5. The time now is 08:03 AM.