NMU70NV45DD for a cluch

Diesel Auto Power 1st gen injectors
6 16 for injecters
Bosch 400RPM spring for 1989-1993
1989-1998 12v 60# over stock valve spring (set of 6) 12 required

D-tech s300 turbo 64mm 64/65/12
or
Borg Warner 63/68/14 turbo

what do you think will it roll the coal

 

Oh, you'll roll the coal alright.

 

thats the plan i hope i dont put it all together and break be for the truck pulls

 

I ain't no pulling expert, but there's a few guys on here that'll be able to tell you better than me if you're going in the right direction. I believe there's also a section specifically for pullers somewhere on this fine site...

 

ok think you for the input

 

No worries!

 

no one really seems like they wont to help any becouse i wrote i thread about making a pulling truck and no one really said anything

 

Yeah, I read that. Most likely the pulling guys are busy building their trucks for the summer. My best advise is to go through old posts and read, read, read. And when you're sick of reading, read some more!
And besides, no one wants to give you advise on your truck if you're competing against them. That'd be like shooting yourself!

 

im just going to pull at a couple of county fair here in michigan but i hear you and i read alot of them and they dont really tell much