hey folks back again looking for help. can anyone tell me if they make replacement ends for the shyjacker DL10 ADJUSTABLE DRAG LINK. THE BUSHING BETWEEN THE FRONT END DRAG LINK AND DROP DOWN PITMAN ARM IS TOAST. NEEDS REPLACING. I CANT BELIEVE THAT I HAVE TO SPEND ANOTHER 256.00 FOR THE WHOLE LINK AGAIN AND EVERY TIME A BUSHING WEARS OUT ON IT.CAN I JUST REPLACE THE BUSHING.. ANY HELP WOULD BE GREAT.THANKS.

 

Talk to these guys. they build some pretty cool stuff. I am thinking on having them make me up a drag link for mine. Price is right too.
1.25"x.219 Wall DOM Tie-Rod 7/8x18 Threads | Tie Rods | WFOConcepts.com

 

That would be a sweet set-up for replacing the long steering link on the D60F's...since they don't make a replacement that I can find.

Just the skyjacker drag link he's talking about is curved...so not sure if they could build him one or not?

 

They have some nice bending equipment they may be able to make one up.

 

this is the one I thought it was.
Skyjacker Adjustable Drag Links DL10 - Free Shipping on Orders Over $99 at Summit Racing

 

I don't know if the ends will thread into the skyjacker center link. But I use an adjustable drag link for the 1 ton Chevys, moog ends, and they are available at any parts store.

 

Cool what year?

 

I think I ordered them for an 82 K30, adjusting sleeve ES362S, ends ES2026R, ES2027L. With the 4 inch lift on mine, I did have to get a drop pitman arm for drag link to line up straighter.

 

Thanks that's good to know.

 

You're welcome.

 

thanks for the input. i emailed them with my problem.

 

how is it working out.

 

i have the 6 inch lift and the drop down arm already

 

thats it i cant believe i cant just buy the front part to go to pitmam arm

 

i have posted pics of my problem in my photo gallery