Second gen seats
#3
I put seats from a '94 in my '89. All the mounting holes touched the floor pan except the rear outside mounts. I propped those up with about 3" long aluminum tubing.
As for the cup holder, you could try that 2nd gen seat mount holder, but I hear it gets in the way of the getrag shifter.
As for the cup holder, you could try that 2nd gen seat mount holder, but I hear it gets in the way of the getrag shifter.
#7
Registered User
I have 2000 seats and the cupholders were ment for the rear. So I cut holder off the bracket and shifted it forward about 5". Notice the spider in the first picture
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post