I got so seats out of a 99 dodge that I am going to put in my 93, I am wondering if any one has done this and if so what modifications do I need to do to the backets. I am 6'3" so I still need the seats about the same height as the stock one. Thanks in advance.

 

They will work there are quite a few write-ups on this topic on the internet. But you will prob have to build a pretty special if you are 6'3". Im 5'10" and had a lot of trouble with my second gen seat swap. Mine were the ext cab seats so that might have been why idk really.

 

I'm 6'8" and installed a 2nd Gen 40/20/40 in my crewcab. There is a write up I did in the Sticky....with a build diagram as well. Might need to tweak it a little for a clubcab or Reg cab...but should point you in the right direction.

 

The seats I got are out of an extended cab does that make a difference.