Have you given any thought to air ride? I looked into it and found one source for the front end. Just a thought, Mike.

 

Sounds good to me. If your truck is that heavy AND it makes you money, then it's a good thing to do. Any repairs or additions are probably tax deductable. I'm just playing and replacing the other four trucks my wife says I need to get rid of. It just hurts me to sell anything mopar. packratc

 

you guys know you can buy a pair of 7226S springs from rockauto for like $135 shipping included ? and type this code 74297636157823 into the "How did you hear about us" box to get a discount

 

can't do the $500.00 springs.sounds good but just can't warrant the price.going to go with 7226s springs.thanks for all the input.

 

go with the 5716 tried a variety went with those as they had the best ride and load for my butt

 

Im fixin to replace my ball joints, control arms, etc so I might as well go ahead and put some 2" spacers in my sagging springs at the same time.
My build sheet says I have a 5500 lb front axle but the only ball joints that come up for 92 d250 are for 3k & 4k axles. Could this be a mistake on the build sheet?

 

yes, it's a mistake.you have a 4000lb. front axle.my build sheet has the same mistake.pm me if you can't find control arms.i found a place that has them.will have to look up their address.

 

has anyone of you guys run the 7226s springs on the d350?

 

This is a pretty old thread, you might get more responses if you post this as a new thread...Mark