any one come up with a fix or know of replacements for the vents in the dash that are loose and floppy?

 

Hey Kelly let me look on my extra dash to see if my extra's are any good how many do you need ?

 

I took mine out and stuck the "fuzzy" 1/2 of the black Velcro kits that you can get from Home Depot on them to replace the worn out OEM friction strips. Put one small piece on both top and bottom if I remember right. Also, gave me a good time to run them through the wife's dishwasher first!

 

What's the trick to getting those guys out of the dash to put in the dishwasher?

 

X2, I used some felt strips on mine. If you look closely at the vent you`ll see a small pin sticking out on the top n bottom. simply lever the center section out with a small screwdriver

 

Just did this yesterday. There is a metal pin pushed in on the back side. Pop it out. Then there are pins on the top and bottom, which are also the pivots for the vent. Push them down and in and it will pop out.