Engine adapter plate for NV4500 swap
#1
Registered User
Thread Starter
Join Date: Nov 2007
Location: Maine
Posts: 1,816
Likes: 0
Received 0 Likes
on
0 Posts
Engine adapter plate for NV4500 swap
Hey guys,
Every time I look for a 2nd gen engine adapter, someone wants as much as I paid for the tranny itself. Will a 3rd gen 5.9L engine adapter work? Thanks,
-Luke
Every time I look for a 2nd gen engine adapter, someone wants as much as I paid for the tranny itself. Will a 3rd gen 5.9L engine adapter work? Thanks,
-Luke
#2
Registered User
Join Date: Jan 2009
Location: Bountiful, Utah
Posts: 2,128
Likes: 0
Received 0 Likes
on
0 Posts
I got one for $60 from a friend of mine. Keep checking ebay and local trucks getting parted out. I saw one on ebay a while back for $125. Not sure on the 3rd gen plate...
#4
hey-Hey!!!,
From a past note from Mark Nixon even the later 2003+ plates had some holes moved on the engine interface for some reason. No independant confirmation at all but I have not seen Mark mistaken on stuff like this very often.
I'd put a 'Wanted' ad up in the classifieds( on this and perhaps others ).
cheers,
Douglas
From a past note from Mark Nixon even the later 2003+ plates had some holes moved on the engine interface for some reason. No independant confirmation at all but I have not seen Mark mistaken on stuff like this very often.
I'd put a 'Wanted' ad up in the classifieds( on this and perhaps others ).
cheers,
Douglas
Thread
Thread Starter
Forum
Replies
Last Post
oliver foster
12 Valve Engine and Drivetrain
7
01-15-2010 08:22 PM
roverhybrids
3rd Gen Engine and Drivetrain -> 2003-2007
0
05-31-2007 08:08 PM