dyno sunday
#1
dyno sunday
going to dyno finally on the 23rd
any estimates on hp/tq with the mods in my sig
im guessing 265/510 somewhere in that ballpark
im pulling 37 psi, with 1100 on the pyro
feels kind of flat down low but it picks up pretty good in the mid to upper rpms
any estimates on hp/tq with the mods in my sig
im guessing 265/510 somewhere in that ballpark
im pulling 37 psi, with 1100 on the pyro
feels kind of flat down low but it picks up pretty good in the mid to upper rpms
#4
well i took it to spin the drum today
im not going to say im dissappointed but
it didn't make the number i thought it would
232/511 was my peak with 21psi and 800 on the pyro
we tryed every way to get a load on the engine dyno brake and my brakes
the thing just would not spool up
but for a 4 second run at 78 mph what can i expect
im not going to say im dissappointed but
it didn't make the number i thought it would
232/511 was my peak with 21psi and 800 on the pyro
we tryed every way to get a load on the engine dyno brake and my brakes
the thing just would not spool up
but for a 4 second run at 78 mph what can i expect
#5
as far as my twin intake i can get pics soon its not on the truck at the moment i've got a cheap lowes 90 2" diameter untill i can get a plate made to bolt the intake too.
Thread
Thread Starter
Forum
Replies
Last Post
bigman
3rd Gen High Performance and Accessories (5.9L Only)
10
05-23-2009 12:41 PM