Works great holds a steady 10psi at idle vs a bouncing one with the fs1221 cant pull it down lower then 3psi at wot

 

[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]

 

Looks great! Good job!

 

I gained more then 1 psi at wot now its at almost 5psi instead 4ish. And it lets you pivot the filter to clear the lift pump no issues with throttle linkage. I already had a fuel heater delete and fs1221 done so just remove the filter and spud (fuelheater if you had one) install the longer spud and nut into the filter head then the adapter and holding nut fill and install your water separator and filter crack open your bleed give the lp a pump and its good to go

 

Heres vids if ole shakey with the ofi lpplp and dual fuel
http://www.youtube.com/watch?v=ifJRb...1&feature=plcp
http://www.youtube.com/watch?v=HTw8G...2&feature=plcp

 

So this will not work with the fuel heater?

 

Yes this deletes the fuel heater