Does this look like a stock transmission?
#1
Registered User
Thread Starter
Join Date: Jul 2011
Location: Virginia
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Does this look like a stock transmission?
So, I'm trying to order motor and trans mounts and the anchor 2667 and 2668 are the only ones I've seen people mention on the forums. All the parts websites confirm those numbers.
Problem is, my trans mount looks like it has a pin with a roller looking rubber around it and it feeds through a sideways oriented collar down in the U of the crossmember and bolts through a tab on the trans either side of the collar.
I'm sure I made that crystal clear. I barely understand it and I wrote it.
Does this look like yours?
Problem is, my trans mount looks like it has a pin with a roller looking rubber around it and it feeds through a sideways oriented collar down in the U of the crossmember and bolts through a tab on the trans either side of the collar.
I'm sure I made that crystal clear. I barely understand it and I wrote it.
Does this look like yours?
Thread
Thread Starter
Forum
Replies
Last Post
Brambles
3rd Gen High Performance and Accessories (5.9L Only)
3
09-12-2006 10:59 PM
carcrz
General Diesel Discussion
2
08-12-2006 08:52 AM
jerky1280
24 Valve Engine and Drivetrain
6
06-14-2006 05:19 PM