>>> COINED DRWs and CENTRAMATICS <<<
09-21-2011, 12:00 AM
#1
Registered User
Thread Starter
>>> COINED DRWs and CENTRAMATICS <<<
I was telling a friend about Centramatics and he brought up a good question that I really didn't know how to answer.
My 1985 DRW Ford wheels are flat-faced, not-coined as the DRW Dodge wheels are.
He wanted to know if and how the Centramatics would work with coined wheels.
I ordered #400-408 STEER and #400-409 DRIVE
I did not see a separate part-number for coined DRW wheels.
Does anyone know ??
My 1985 DRW Ford wheels are flat-faced, not-coined as the DRW Dodge wheels are.
He wanted to know if and how the Centramatics would work with coined wheels.
I ordered #400-408 STEER and #400-409 DRIVE
I did not see a separate part-number for coined DRW wheels.
Does anyone know ??
09-21-2011, 12:02 AM
#2
Registered User
I don't see why the wouldn't. As for the rears, I believe they're intended to run between the duals and the front will be inside the wheel, of course.
At least you'll have a brake dust shield for the fronts
.
At least you'll have a brake dust shield for the fronts
.
Thread
Thread Starter
Forum
Replies
Last Post
Weatherbyman
3rd Generation Ram - Non Drivetrain - All Years
17
12-22-2004 05:01 AM