Went to the Claremont Diesel Round up today and put the truck on the dyno jet, i ran the truck tuned like i drive it every day, no pre tweakin. <br><br>Max HP 275.9 @ 2000 rpm and flat lined up to 3000 rpm <br>Max TRQ. 646.6 @ 2100 rpm and dropped off to 450 at 3000 rpm <br>Max EGT never over 1200 degf <br>MAx Boost 32 psi, i can easily make 38 psi on the street i know whats up there. <br><br>Rick D<br>

 

Impressive #'s Rick, good looking truck!

 

Congrats Rick!<br>Those are some pretty healthy numbers and you are right about torque. .<br>Bob

 

Great numbers Rick!

 

Nice looking truck too. 8)

 

Good to see those numbers just keep going up for the first GEN trucks.<br>---<br>Al

 

That truck makes me homesick for my old 89, it was the same color and everything. That truck is set up to work too with all the hardware he carries. Glad you could make it and hope you can make the next one.<br><br>DD4X4

 

That was a very impressive run Rick .... thanx again for your help with the 16cm housing.

 

And he had a $%&amp;#* nice cloud of smoke too. ;D<br><br>Chris