1st Gen. Ram - All Topics Discussion for all Dodge Rams prior to 1994. This includes engine, drivetrain and non-drivetrain discussions. Anything prior to 1994 should go in here.

A/c wows

Old Jun 9, 2009 | 05:23 PM
  #1  
Greed 93's Avatar
Thread Starter
Registered User
 
Joined: Dec 2008
Posts: 395
Likes: 0
From: Morgan,UT
A/c wows

a/c stopped workin today charge is good fuse is good anyone know what else to look at jumped the lp switch and nothing anyone know where the relay is any help would be great thanks.
Reply
Old Jun 9, 2009 | 06:08 PM
  #2  
wannadiesel's Avatar
Adminstrator-ess
20 Year Member
 
Joined: Mar 2003
Posts: 22,594
Likes: 19
From: New Holland, PA
Is the truck charging? Does the OD work?
Reply
Old Jun 9, 2009 | 06:45 PM
  #3  
Greed 93's Avatar
Thread Starter
Registered User
 
Joined: Dec 2008
Posts: 395
Likes: 0
From: Morgan,UT
yes and yes
Reply
Old Jun 9, 2009 | 06:52 PM
  #4  
wannadiesel's Avatar
Adminstrator-ess
20 Year Member
 
Joined: Mar 2003
Posts: 22,594
Likes: 19
From: New Holland, PA
Just making sure you had a working crank sensor.

The relay is on the fender, it's the one furthest to the rear.
Reply
Old Jun 9, 2009 | 07:01 PM
  #5  
Greed 93's Avatar
Thread Starter
Registered User
 
Joined: Dec 2008
Posts: 395
Likes: 0
From: Morgan,UT
ok will check that next all data is no use for trouble shooting this or the locations will the blower resistor also make it not work the old owner put in a toggle switch for the blower motor said he could not find the resistor
Reply
Old Jun 9, 2009 | 08:24 PM
  #6  
97catintenn's Avatar
Registered User
 
Joined: Nov 2003
Posts: 503
Likes: 2
From: Columbia, TN
Did he wire in the switch by removing the heater/ac controls in the cab? There is one little wire that's all alone on the back of the controls for the ac...it's easy to overlook.
Reply
Old Jun 9, 2009 | 08:39 PM
  #7  
Greed 93's Avatar
Thread Starter
Registered User
 
Joined: Dec 2008
Posts: 395
Likes: 0
From: Morgan,UT
No just cut the wires at the motor and ran a toggle to them also pulled the relay i have power at dark blue heavy gauge power at brown heavy gauge and ground at blue with orange stripe if i put a jumper from heavy blue to blue with black stripe it works but tried two other relays and nothing im at a loss here .
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
johnnyboy_10138
3rd Generation Ram - Non Drivetrain - All Years
3
May 30, 2009 08:46 AM
bigreddiesel
HELP!
1
Nov 23, 2006 09:21 PM
Commatoze
Other
4
Jan 13, 2003 02:12 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:06 AM.