I'm looking for a new set of injectors for my '93 and have narrowed my choices to the Bosch 190's or 230's. I chose these two because the are small and not aftermarket makes. I know the 190's are 30hp give or take over stock but I can't find anything about the 230's. With my current setup I can never get above 900f empty or 1100 towing. I just want a little bit more power with out have heat issues. Which would you guys prefer?

 

I'm running 190s and am satisfied. Don't know anything about the 230s

 

Be careful about the 230's, they may be for a 2nd gen. They could also have the wrong spray angle.

 

I'll probably go with the 190's. Does everybody have problems with them hazing like I keep reading?

 

I've got mine tuned to where there is only a slight haze when accelerating. Usually only can see it at night in the car lights.

 

i run 190's truck moves just fine.
on cold mornings they do haze but not too bad.
i like not having to worry about melting when towing

 

190's seem the way to go. Is there a diffrence between the PDR 190's vs. everybody elses 190's?