I recently went to start playing with the VE on my new '93 and discovered that the little boost line that runs between the manifold and the AFC is broken off right at the banjo fitting. Everything was in place and it was pretty much impossible to notice that it was broken until I took the bolt out. Anybody know where I can get one? Maybe a cummins parts dealer? Thanks

 

Try this

https://www.dieseltruckresource.com/...0&postcount=10

For an easy repair............

 

I did it on mine but my hole in the manifold was 1/8" pipe for the 90 and i had to drill the afc out since it is metric bolt thread and tap it for 1/8" pipe thread as well. I left the plastic a little longer so that if i take the afc apart i can leave the line on. Its pretty handy that way.