I am going to add fuel a fuel pressure gauge and get 2 sending units so I can read fuel pressure pre-filter and post-filter. I am wondering if the tapped banjo bolts offerred at Geno's that say 98.5-02 will still work on the 1st gens? Anyone have experience with their 30" universal line?

Thanks,
Brian

 

Yes, the later model banjo bolts work fine on our trucks. I had some left over from my 2002 truck when I upgraded. I used them on my current 93 no problem.

 

i use hyd line on my gauges oil and fuel you can get them custom made very cheap they have steel braiding inside and can never rub through and rated for 3000 lbs.

 

I have a electric fuel pressure sending unit off an Onan 6BT. My plan is to use a water pressure gauge that reads in 1/4lb increments. Does anyone see any problems with this?