66mm and 5x16's
#1
Registered User
Thread Starter
Join Date: Sep 2009
Location: Collingwood Ontario, Canada
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
66mm and 5x16's
Just bought a 66mm turbo of my buddy. It's off of his pulling truck and it was just rebuilt. He told me to run a set of 5x16's and the ve would hold it no problem. Can anybody give me more input? I am trying to source an nv4500 to build up a bit. Would I need to get anything done to the head? How much hp do ya figure I would be throwing down?
#4
Registered User
Thread Starter
Join Date: Sep 2009
Location: Collingwood Ontario, Canada
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
I already have a dennyt stage 2 pin and a lift pump. I'm to worried about instant spooling. It is the manual trans and I will spend most of its life in the drag strip
Thread
Thread Starter
Forum
Replies
Last Post
89dieselkong
2nd Gen. Dodge Ram - No Drivetrain
2
07-05-2009 08:35 PM
tatkins85
3rd Gen High Performance and Accessories (5.9L Only)
17
04-30-2008 04:19 PM
emfc_22
3rd Gen High Performance and Accessories (5.9L Only)
8
10-28-2006 11:56 PM
PourinDiesel
3rd Gen High Performance and Accessories (5.9L Only)
0
11-27-2005 03:53 AM