What does it take to bolt an NP205 to a 4X2 getrag or NV4500? Can it be done? Thanks.

 

You trying to avoid divorcing it?

 

You'll need the getrag 4x4 style mainshaft, tailshaft housing and coupler to bolt to an np205 29 spline input case. I recommend using a divorced unit with 32 spines on all three shafts... no trans mods necessary... and good luck finding a 4x4 mainshaft outside of buying a whole new trans.

 

Okay. Thanks. Just wondering if it was reasonably possible. This is actually for a my buddy's 4bt project going into a lifted Eagle 4X4 car. We don't really think there will be much room for a divorce transfer case.