1992 Bumper for Wench
Thread Starter
Registered User
Joined: Jul 2014
Posts: 20
Likes: 0
Sorry to de-rail.
On a serious note...
Reunel out of Yuba City Ca was making some really nice bumpers for the Dodge several years back.
I have had one on my 2nd gen for about 14 years now, it has put several deer in the freezer rather than total my truck over the years.
They where not cheap, but they where an well made unit.
On a serious note...
Reunel out of Yuba City Ca was making some really nice bumpers for the Dodge several years back.
I have had one on my 2nd gen for about 14 years now, it has put several deer in the freezer rather than total my truck over the years.
They where not cheap, but they where an well made unit.
All in good fun
Registered User
Joined: Feb 2014
Posts: 108
Likes: 0
I have my bumper almost finished, i will take a picture and post it. It would house a winch very nicely. It is a bit on the larger side but it looks really good on our trucks i think.
Sent from my iPhone using IB AutoGroup
Sent from my iPhone using IB AutoGroup
Registered User
Joined: Aug 2013
Posts: 4,918
Likes: 603
From: Tulsa, OK
Registered User
Joined: Aug 2013
Posts: 4,918
Likes: 603
From: Tulsa, OK
If I can ever get my house issue settled and sold I'm looking to buy a new place and have a shop built. When that day comes I plan to start offering some 1st gen bumpers at a more reasonable price. I know what mine cost to build and guarantee its stronger than anything offered now. It would easily accommodate a winch or even two wEnches.
Registered User
Joined: May 2007
Posts: 1,437
Likes: 208
From: Saskatchewan
Backwoods bumpers offers one now for a 1st gen
https://www.dieseltruckresource.com/...tml?styleid=11
https://www.dieseltruckresource.com/...tml?styleid=11
Registered User
Joined: Dec 2008
Posts: 1,751
Likes: 0
There's definitely a few things I would change up a little or offer as as an alternate version.
I did put some practical thought into design if you haven't seen my build thread. The pull tabs extend through the bumper and are actually the bumper mounts and attached to frame with 8 grade 8 bolts. The bumper also give you a full 6" between the frame rails to stand on while working on the truck. 4" wasnt enough for my size 12 and 8" looked to much like a landing platform. The bottom angled portion was cut and angled to keep it from looking to tall but still cover the front spring hangers. IMO looks kinda goofy to see them under the bumper of an approaching truck.
I did put some practical thought into design if you haven't seen my build thread. The pull tabs extend through the bumper and are actually the bumper mounts and attached to frame with 8 grade 8 bolts. The bumper also give you a full 6" between the frame rails to stand on while working on the truck. 4" wasnt enough for my size 12 and 8" looked to much like a landing platform. The bottom angled portion was cut and angled to keep it from looking to tall but still cover the front spring hangers. IMO looks kinda goofy to see them under the bumper of an approaching truck.
Registered User
Joined: Aug 2013
Posts: 4,918
Likes: 603
From: Tulsa, OK
There's definitely a few things I would change up a little or offer as as an alternate version.
I did put some practical thought into design if you haven't seen my build thread. The pull tabs extend through the bumper and are actually the bumper mounts and attached to frame with 8 grade 8 bolts. The bumper also give you a full 6" between the frame rails to stand on while working on the truck. 4" want enough for my size 12 and 8" looked to much like a landing platform. The bottom angled portion was cut and angled to keep it from looking to tall but still cover the front sitting hangers. IMO looks kinda goofy to see them under the bumper of an aperiodic truck.
I did put some practical thought into design if you haven't seen my build thread. The pull tabs extend through the bumper and are actually the bumper mounts and attached to frame with 8 grade 8 bolts. The bumper also give you a full 6" between the frame rails to stand on while working on the truck. 4" want enough for my size 12 and 8" looked to much like a landing platform. The bottom angled portion was cut and angled to keep it from looking to tall but still cover the front sitting hangers. IMO looks kinda goofy to see them under the bumper of an aperiodic truck.
I was thinking of something along the lines of what you built when I ran into your thread on the bumper.
Registered User
Joined: Oct 2006
Posts: 701
Likes: 1
From: Indianapolis, Indianna
