1 in.,lift all around
Thread Starter
Registered User
Joined: Jan 2010
Posts: 637
Likes: 24
From: Oklahoma
1 in.,lift all around
I would like to do a 1 in. lift on my 91- d350 ext., cab. what problems will run into?I am sure this has been asked before ,but it's all new to me . I'm not sure how to post right yet.
Registered User
Joined: Jan 2008
Posts: 7,547
Likes: 2
From: Quinton, New Jersey (middle of nowhere)
In the rear you could do a lift block from a factory 4x4 truck.
And in the front you could do the Aftermarket HD coil springs or just the spacers on top of your stock coils, this usually levels it out with the back when the back is stock.
Check out the "sticky" at the top of the board, lots of info in there on the raising of a 2wd.
Brandon
And in the front you could do the Aftermarket HD coil springs or just the spacers on top of your stock coils, this usually levels it out with the back when the back is stock.
Check out the "sticky" at the top of the board, lots of info in there on the raising of a 2wd.
Brandon
Thread
Thread Starter
Forum
Replies
Last Post
Cspotrun
Performance and Accessories 2nd gen only
32
Jun 7, 2006 11:33 AM
Lambo
3rd Gen High Performance and Accessories (5.9L Only)
5
Sep 19, 2005 10:55 PM
Moking 24V
3rd Gen High Performance and Accessories (5.9L Only)
11
Feb 11, 2005 12:28 PM