Wiring help, Cruise control
Thread Starter
Registered User
Joined: Nov 2006
Posts: 56
Likes: 0
From: Largo, Fl
Wiring help, Cruise control
I have a 1998 12V that I converted from a 47RE to a NV4500. I would like it it I could get my cruise control to work. The cruise control light comes on but doesn't set speed.
I was told that the speed sensor is in the rear end, but the 47re had a output sensor on the back of it. The NV4500 only has backup light wires on it.
I was told that the speed sensor is in the rear end, but the 47re had a output sensor on the back of it. The NV4500 only has backup light wires on it.
Registered User
Joined: Dec 2003
Posts: 14,672
Likes: 9
From: Montana
'98s are so much different electrically than the other 12 valves.
If I'm not mistaken the ground speed signal that the computer uses comes from the rear differential sensor under 30 mph and from the tranny or t-case when faster.
Sounds like you somehow need a sensor on the tranny.
Wonder if your ABS works too.
If I'm not mistaken the ground speed signal that the computer uses comes from the rear differential sensor under 30 mph and from the tranny or t-case when faster.
Sounds like you somehow need a sensor on the tranny.
Wonder if your ABS works too.
Thread
Thread Starter
Forum
Replies
Last Post
Firstgenfanatic
1st Gen. Ram - All Topics
10
Nov 8, 2009 04:05 PM
Landini1
3rd Gen Engine and Drivetrain -> 2003-2007
3
Mar 6, 2009 07:01 PM
TexasDiesel
2nd Gen. Dodge Ram - No Drivetrain
9
Dec 27, 2002 10:47 AM
