timing and pump shop-northern IL
#1
Registered User
Thread Starter
Join Date: Nov 2004
Location: Chicago
Posts: 542
Likes: 0
Received 0 Likes
on
0 Posts
timing and pump shop-northern IL
You guys have always come up with good answers, which is appreciated.
I quit working in wisconsin, and never got around to taking my truck to hucksdorf.
Im looking for a shop in Northern IL that knows there way around the pump.
I still havent gotten my idle issue with my GSK worked out, after doing some researching, I am thinking that it is compounded by slipped timing.
Long story short, i want the timing bumped, and someone experienced with the pump to get the idle all worked out.
If it makes a difference, im only seeing rpms to about 2500 now, which again leads me to suspect the timing.
thanks
I quit working in wisconsin, and never got around to taking my truck to hucksdorf.
Im looking for a shop in Northern IL that knows there way around the pump.
I still havent gotten my idle issue with my GSK worked out, after doing some researching, I am thinking that it is compounded by slipped timing.
Long story short, i want the timing bumped, and someone experienced with the pump to get the idle all worked out.
If it makes a difference, im only seeing rpms to about 2500 now, which again leads me to suspect the timing.
thanks
#2
Administrator
Shout out to Dieselman2300, he is as sharp as anyone, should know where to find a good shop.
I have been told there is a good shop close to Kankakee, just west and south, but I do not remember the name of it. If you don't find a name, I will ask my buddy about that shop the next time I see him.
I have been told there is a good shop close to Kankakee, just west and south, but I do not remember the name of it. If you don't find a name, I will ask my buddy about that shop the next time I see him.
Thread
Thread Starter
Forum
Replies
Last Post
smokeyram
12 Valve Engine and Drivetrain
4
01-05-2008 10:34 PM
jaredb900rr
3rd Gen High Performance and Accessories (5.9L Only)
12
10-09-2006 11:54 PM
West Coast
12 Valve Engine and Drivetrain
3
03-26-2006 11:09 AM