pulling head
08-01-2005, 07:45 PM
#1
Registered User
Thread Starter
Join Date: Apr 2005
Location: Texas
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
pulling head
in the process of pulling my head to replace the head gasket and am having problems getting it out. just wondering if anybody had any tips or anything.
08-02-2005, 03:12 PM
#2
Registered User
Thread Starter
Join Date: Apr 2005
Location: Texas
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
since nobody has any tips on that, maybe somebody could answer me this. my head has been o-ringed and i really need my truck but cant get a copper head gasket and rings for about a week. if i was to put a stock head gasket on and take it easy, would it work?
08-02-2005, 05:38 PM
#4
Registered User
Thread Starter
Join Date: Apr 2005
Location: Texas
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
turns out my truck has fire rings with groves cut in the head and block. could i run a marine or one of others till i can get the fire rings and new gasket?
Thread
Thread Starter
Forum
Replies
Last Post
MikeThomas
1st Gen. Ram - All Topics
11
05-11-2008 11:39 AM
mullercarl
Competition / Pulls / OffRoad
45
03-19-2007 10:10 AM