overflow valve p/n
#17
Let me add an update on a price change and misunderstanding here from what he even quoted me Versus what is on my bill for one of these things..
O/F Valve=$35
Gaskets=$2
Shipping=$7.50 =Total=$44.50
DO NOT try taking the 15mm top screw out to mess with the spring, it is darn near impossible to press it back in the o/f valve once it is in..you need to notch the head back 1/4 inch to get it in there as well..it is a project to say the least
O/F Valve=$35
Gaskets=$2
Shipping=$7.50 =Total=$44.50
DO NOT try taking the 15mm top screw out to mess with the spring, it is darn near impossible to press it back in the o/f valve once it is in..you need to notch the head back 1/4 inch to get it in there as well..it is a project to say the least
#18
Registered User
Join Date: Dec 2003
Location: Garrard county, Kentucky
Posts: 3,077
Likes: 0
Received 0 Likes
on
0 Posts
Yep. $35 a piece, and $1 a piece on the washers, plus about $7.00 shipping. Mine should be in tomorrow i hope. I sent out a check last Friday, but he may be waiting on it to clear or something. Cant wait to get it in.
Eric
Eric
#19
Registered User
Join Date: Nov 2004
Location: Fairbanks, Alaska
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
I just installed a new OFL from Marty and I could not install it without taking off the 10MM bolt. It was hitting on the intake manifold. So I take it off and reinstall it. Do I screw any factory setting or anything like that when I did this? Thanks
#20
Registered User
Originally posted by alaskanassassin
I just installed a new OFL from Marty and I could not install it without taking off the 10MM bolt. It was hitting on the intake manifold. So I take it off and reinstall it. Do I screw any factory setting or anything like that when I did this? Thanks
I just installed a new OFL from Marty and I could not install it without taking off the 10MM bolt. It was hitting on the intake manifold. So I take it off and reinstall it. Do I screw any factory setting or anything like that when I did this? Thanks
#22
Registered User
Join Date: Oct 2004
Location: St Augustine, Florida
Posts: 755
Likes: 0
Received 0 Likes
on
0 Posts
It is a pressure check valve. It has a spring, ball and spacer. The spring should measure .5 inches and can be resized in a pinch but springs lose tension when stretched so better to use a new one.
#23
Registered User
Join Date: Dec 2003
Location: Garrard county, Kentucky
Posts: 3,077
Likes: 0
Received 0 Likes
on
0 Posts
If any of you sent him a check for your overflow valve; how long did it take to get there? I sent the check out over a week ago, and its still not here. I know he hasnt cheated me; im guessing its just the mail is slow, but im anxious to get this in!
Eric
Eric
#24
Cummins Driver:I payed over the phone by C/C and it took almost 2 weeks, not very good service, plus they can't ship it to a P.O. Box for some reason..it's so small there's no reason for it..oh well..truck runs better now
#25
Registered User
It's always been about a week for me paying over the phone with a CC. I imagine he runs out quite often since his price is the best one around by far.
The reason for no PO box shipping is that it's shipped UPS, must be a feud or something, the US post office won't let UPS ship to them.
The reason for no PO box shipping is that it's shipped UPS, must be a feud or something, the US post office won't let UPS ship to them.
#26
Registered User
Join Date: Dec 2003
Location: Garrard county, Kentucky
Posts: 3,077
Likes: 0
Received 0 Likes
on
0 Posts
Got mine, and got it in today. Seems to have helped a decent little bit. Im happy with it, even if it did take a few days to get here, because thats the best price ive heard of. Im not complaining.
Eric
Eric
Thread
Thread Starter
Forum
Replies
Last Post