New batteries, starter, fuses and relays. What's next? Oh its a 94 2 wd 5 speed. Tia.

 

Clutch pedal switch?

 

poor ground???Even if the starter is new...Did you bench test it before installing??Now a days quality control is not the best..

 

The newer cheapie starters are a common failure these days...its a shame. x2 on double checking the starter.

 

Doh, just re-read and saw clicks.......... Starter contact or ground, ignore my clutch switch comment, there would be no click if it were bad.

 

99% sure that one of the new parts is the problem.
Most likely the starter.
Just because parts are new you can't assume they are good these days.

 

Battery cable or a bad connection cleverly disguised as a good connection.

 

I haven't had a chance to tear into this again. Solenoid is working fine so I guess its not the fuseable link. Must be the starter. Its not doing anything, not even clicking. Ill take it off tomorrow and tear it apart.

 

Ok, got the starter off and cant get it to spin just shoots the gear out but wont turn. I guess it's junk.

Will one off of a first gen work?

 

The 1st gen starters Larry B sells are different than the newer trucks.

 

There is a guy that has one I can have Its a first gen starter Im wonderig if it will fit my 94? or can I take the motor off it and put it on this one?

 

I've got my last couple starters from dbelectical on ebay. Decent prices and fast service and so far on 2 CTD's and my KUbota tractor they have been very reliable.

 

Maybe you could rebuild your old 2nd gen starter...Maybe your contacts are just burnt out...You could get the larger contacts at Geno garage..